Save 10% on all Craftmade. Use coupon CRAFT10 at checkout.
Offer Ends 10/23/2015
|Bulb Base||Candelabra (E12)|
|Light Direction||Down Lighting, Up Lighting|
|Number of Bulbs||3|
|Suggested Room Fit||Outdoor|
|Watts Per Bulb||60|
- Cast aluminum construction
- Clear glass
- Tail piece can easily be removed
- Height: 24.75"
- Tail Height: 9"
- Width: 9.5"
- Depth from Wall: 9.6"
- Height from Center of Outlet: 19.25"
- Backplate Height: 7.13"
- Backplate Width: 4.5"
- Number of Bulbs: 3
- Bulb Base: Candelabra (E12)
- Bulb Type: Incandescent
- Bulb Included: No
- Watts Per Bulb: 60
- Wattage: 180
- Energy Star: No
- Photocell: No
- Motion Sensor: No
- UL Listed: Yes
- UL Rating: Wet Location
- Bulb Base - Candelabra (E12): The E12 (Edison 12mm), Candelabra Edison Screw (CES), "Candelabra" is a term for the small-based incandescent light bulbs used in luminaires made for lighting and decoration.
- Compatible Bulb Types: Nearly all bulb types can be found for the E12 Candelabra Base, options include Incandescent, Fluorescent, LED, Halogen, and Xenon / Krypton.
- UL Listed - Indicates whether a product meets standards and compliance guidelines set by Underwriters Laboratories. This listing determines what types of rooms or environments a product can be used in safely.
Additional Craftmade Links
- View Manufacturer Warranty
- Shop All Craftmade Products
- Shop All Craftmade Curved Glass Collection Products
Our SKU: Z340
This product is listed under the following manufacturer number(s):
- Matte Black
*Denotes a finish or option that has been discontinued
3 Questions from the Community
The Craftmade Z340 tail does come with this unit.
Does the tail come in the box or do I have to order it separately?
A. The Craftmade Z340 tail does come with this unit.
The Craftmade Z340 "tail" measures 9". It is removed by removing the small screw located under the lamp, then unscrewing the tail piece itself.
Please advise as to how long the 'tail' is and how is it removed.
A. The Craftmade Z340 "tail" measures 9". It is removed by removing the small screw located under the lamp, then unscrewing the tail piece itself.
The Craftmade Z340 mounting plate is 5" tall and 4" wide. I think that these will go well together the z345 and the z340.
Please give the dimensions of the piece that will be attached to our house. We want to be sure that it will fit on the width of the siding. Thank you in advance. Does this light compliment the post light #Z345 in style? ce.
A. The Craftmade Z340 mounting plate is 5" tall and 4" wide. I think that these will go well together the z345 and the z340.
Craftmade Curved Glass Collection
Other Products In The Craftmade Curved Glass Collection
Curved Glass 1 Light Lantern Outdoor Pendant - 8 I...$49.00-$49.00(1)
Curved Glass 1 Light Outdoor Wall Sconce - 8 Inches Wide$42.00-$42.00(1)
Single Light Up Lighting Medium Outdoor Post Light...$42.00-$42.00
Traditional Three Light Up Lighting Large Post Lig...$59.00-$59.00(7)
Sea Gull Lighting 8231
Curved Beveled Glass Outdoor 3 Light Outdoor Lante...$106.47-$107.46
Craftmade warrants against defects in materials or workmanship for a minimum of TWO (2) YEARS from date of purchase for use, and agrees to repair or, at our option, replace a defective unit without charge.
IMPORTANT: This Warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care (as listed on the instructions), the affixing of any attachment not provided with the product, alteration of any attachments factory installed, loss of parts or subjecting the fixture to any but the specified electrical service.
This warranty does not cover failure of bulbs due to accidents, abuse, misuse, vandalism, power surges, and acts of nature such as lightning damage or any bulbs purchased separately and installed by the consumer or any damage to the fixture caused by a separately purchased bulb.
No responsibility is assumed for any special incidental or consequential damages. Damages occurring during transit are not covered by this warranty.
To obtain warranty service, mail sales receipt as proof of purchase-date, and a brief explanation of the nature of the defect, to P.O. Box 1037, Coppell, TX 75019. You will receive, by mail, a Return Goods Authorization number issued by Craftmade, and returned freight prepaid.