Item # bci2889796

The Baldwin DCSEAXSQURCSR150 has been discontinued

** See similar or replacement items below **

Baldwin Seattle Right Handed Standard C Keyway Double Cylinder Keyed Entry Handleset with Contemporary Square Rose and Square Lever on Interior

Model: DCSEAXSQURCSR150

Discontinued
We still have product details and accessories, scroll down to see them!

Product Overview

double-cylinder-functionDouble Cylinder Function: Baldwin double cylinder handlesets require a key to unlock the mechanism on both the interior and exterior sides of the door. Double cylinder locks can pose a safety hazard in times of emergency due to requiring a key to unlock from the inside; please check local codes before installing.

right-handed-informationRight Handed: Handing is determined by standing on the outside of a room, facing the door, and noting on which side the door hinges are located. This handle is right handed, and so when standing outside of the room and facing the door the hinges will be on your right.

Features:

  • Baldwin 5-pin C-Keyway standard
  • Guide posts for easy installation
  • Tested to exceed ANSI/BHMA Grade 2 security
  • Designed for Right handed doors
  • Solid brass deadbolt latch with hardened steel roll pin for additional strength and security
  • Interior comes in same finish as exterior. If split finish is desired, please contact customer service
  • Limited Lifetime Mechanical Warranty and Limited 25 Year Finish Warranty

Product Technologies:

Solid BrassSolid Brass Construction: Baldwin Reserve Series products are constructed from solid brass - providing a more luxurious, higher quality feel than door hardware made with lesser metals. When you hold a Baldwin product in your hand, you will immediately notice the difference that solid brass makes – it is heavier, stronger, and smoother than most of the door hardware on the market today.

Specifications:

  • Backset: Adjustable to 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Edge Bore: 1"
  • BHMA Security: Grade 2
  • Handing: Right
  • Door Thickness: 1-3/4" - 2"
  • Latch Faceplate: Round Corner, Square Corner, Drive-In
  • Projection: 2-7/16"
  • Center to Center: 5-1/2"
  • Grip Center to Center: 8-13/32"
  • Manufacturer Warranty: Limited Lifetime, 25 Year Finish Warranty
Product Variations:
  • DC.SEAXSQU.L.CSR: Left Handed Seattle Double Cylinder Handleset with Curve Lever on Interior
  • DC.SEAXSQU.R.CSR (This Model): Right Handed Seattle Double Cylinder Handleset with Curve Lever on Interior

This product is listed under the following manufacturer number(s):


*Denotes a finish or option that has been discontinued.

Dimensions and Measurements

Backset
2-3/8", Adjustable 2-3/8" or 2-3/4", 2-3/4"
Center to Center
5.5 in.
Cross Bore
1"
Door Thickness
1-7/8", 2", 1-3/4"
Edge Bore
1"
Grip Center to Center
8.4062 in.
Handle Projection
2.4375 in.
Interior Handle Length
4.25 in.
Overall Height
17.5 in.
Trim Height
9.5 in.
Trim Width
2.6875 in.

Included Components

Cylinder Included
Yes

Characteristics and Features

Cylinder
5 Pin C
Function
Keyed Entry, Double Cylinder
Handing
Right
Handle Style
Lever
Keyway
C
Latch Faceplate
Round Corner, Square Corner, Drive-In
Lock Style
Single Point
Material
Brass
Mount
One Piece
Solid Construction
Solid Brass
Theme
Modern

Manufacturer Technology

SmartKey
No

Warranty and Product Information

Approved for Commercial Use
No
BHMA Certification
Grade 2
Collection
Reserve
Series
Seattle