AquaPure SST1HA Whole House Filtration System
Item #:
BCI1939107
Compare Our Prices
Technical Specs
| Installation Guide | |
| Specification Sheet | |
| Approved for Commercial Use | No |
| Flow Rate (GPM) | 8 |
| Product Weight | 4.8 |
This product has additional required/recommended options. To configure, add to your cart.
-
Replacement Filter Recommended
Whole House Filtration System
The Aqua-Pure SST1HA Whole House Filtration System is ideal for hot and/or cold water applications or where maintenance is restricted.
AquaPure SST1HA Features:
- 304 stainless steel housing with 316 cast stainless steel head helps provide maximum strength and durability with very high operating pressure rating
- Especially suitable for applications where solenoid valves are used
- Accepts a wide variety of cartridges, from 1 to 50 micron nominal, to help provide a solution for most water conditions
- Sure-Seal ring nut connector with tightening tool helps enable positive cartridge sealing and easy cartridge change-out
- Includes mounting bracket
- System is manufactured from FDA CFR-21 compliant materials
- System can accommodate unique scale stopper cartridges
- System can accommodate unique progressive porosity sediment reduction pre-filters
- Inlet Outlet Size: 3/4" NPT Horizontal
- Reduces: Sediment, Chlorine Taste and Odor and Scale
- Temperature Range: 200F
- Pressure Range: 300 psi
- Flow Rate: 8 Gallons Per Minute
- Replace Filter Every 6 Months
- Replacement Filters: AP110, AP124, AP117 or AP420
- Degree of Filtration: 1- 50 micron
AquaPure SST1HA Specifications:
- Height: 12.03"
- Diameter: 4.16"
Additional AquaPure Links
Our SKU: SST1HA
This product is listed under the following manufacturer number(s):
- 5592001
Stainless Steel
*Denotes a finish or option that has been discontinued
