California Non-Compliant Shower Head - 2.0 GPM MaximumThis item cannot be shipped to the following location(s): CA
|Flow Rate (GPM)||2, 2.5|
|Installation Type||Ceiling Mounted|
|Number of Shower Heads||1|
- Fully covered under American Standard's limited lifetime warranty
- Superior finishing process - finish covered under lifetime warranty
- Shower heads from American Standard are built to function flawlessly and last a lifetime
- Single spray function - featuring a full body spray pattern
- Shower Head Width: 10"
- Shower Head Depth: 2"
- Shower head rotates on a swivel ball assembly for full coverage
- Flow Rate: 2.5 GPM (gallons-per-minute)
- Designed to easily install with standard U.S. plumbing connections
- All hardware required for installation of shower head is included
Product Technologies / Benefits:
- Lifetime warranty: As an American company, American Standard showers are built tough. Their products live longer in one place than most people do. Drip-free ceramic disc valves, high-grade lead-free brass alloys, and turbine shower heads cables name just a few of the features which make American Standard shower components the industry’s longest lasting. To back this up, all American Standard showers are covered under a lifetime warranty.
- Indestructible Finishes: Through employing only the best finishing practices, such as physical vapor deposition, American Standard faucet finishes are some of the strongest in the industry. When the finish is actually incorporated into the faucet, rather than a coating on the outside, the result is a flawless appearance that eliminates tarnishing, pitting, and peeling while hiding scratches. For this reason, American Standard faucet finishes are fully covered under the lifetime warranty.
About American Standard:An American brand with over 140 years of innovations, American Standard is defined by experience, intelligence, and indelible influence. As the patriarch for nearly every key product category for the kitchen and bath, their offering shows a level of thoughtfulness and sophistication that could only be attributed to a company with a legacy as rich as that of American Standard. Today, professional plumbers and contemporary DIY home owners continue to turn to American Standard because they appreciate this legacy and know they can trust the innovations behind each product. It is for this reason that American Standard is so widely used within residential and commercial projects in both the United States and abroad - their products truly deliver, just as they have for generations.
Additional American Standard Links
- View Manufacturer Warranty
- Shop All American Standard Products
- Shop All American Standard Modern Collection Products
Our SKU: 1660.683
This product is listed under the following manufacturer number(s):
- Blackened Bronze
- Polished Brass
- Polished Chrome
- Polished Nickel
- Satin Nickel
- Stainless Steel
*Denotes a finish or option that has been discontinued
12 Questions from the Community
The American Standard 1660.683 can be mounted to any arm with a 1/2 connection.
Can this be mounted to a wall using a Right Angle Shower Arm
A. The American Standard 1660.683 can be mounted to any arm with a 1/2 connection.
The American Standard 1660.683 is close to the brushed nickel finish from Kohler. There is a slight hue difference.
will the satin nickel finish match a kohler shower arm in brushed nickel?
A. The American Standard 1660.683 is close to the brushed nickel finish from Kohler. There is a slight hue difference.
As long as you stay within the American Standard brand of products all finishes will match. Outside of the brand the only guarantee is the standard chrome.
Will this head, along with 1660.190 match the Serin or Berwick collection in satin nickel?
A. As long as you stay within the American Standard brand of products all finishes will match. Outside of the brand the only guarantee is the standard chrome.
The American Standard 1660.683 has a 2.0 gallon per minute flow rate.
What's the flow rate of this shower head?
A. The American Standard 1660.683 has a 2.0 gallon per minute flow rate.
Yes, the American Standard 1660.683 is designed to simulate a rain-fall with a flow of 2 gallons per minute, thus much more than the mist heads you suggest.
Will provide a gentle "rain" feel? I'm trying to avoid the fine mist heads...that always plug with minerals
A. Yes, the American Standard 1660.683 is designed to simulate a rain-fall with a flow of 2 gallons per minute, thus much more than the mist heads you suggest.
The American Standard 1660.683 does not swivel.
does the head swivel?
A. The American Standard 1660.683 does not swivel.
The American Standard 1660.683 will work for your shower arm.
I have an outside diameter threaded pipe/ arm extention. Will this 1/2"IPS work?
A. The American Standard 1660.683 will work for your shower arm.
The American Standard 1660.683 is a rain shower head that is designed to be mounted from a ceiling horizontally. It would not function properly if mounted to a wall or hung at an angle.
Can American Standard 1660.683 be wall mounted?
A. The American Standard 1660.683 is a rain shower head that is designed to be mounted from a ceiling horizontally. It would not function properly if mounted to a wall or hung at an angle.
This is a shower head only. The ceiling shower arm for this item is the American Standard 1660.190 12.
does it come with the arm to the ceiling?
A. This is a shower head only. The ceiling shower arm for this item is the American Standard 1660.190 12.
The American Standard 1660.683 is typically compatible with any shower arm that you can purchase as the threading is standard. However, we do not have any rainfall (or straight, non-curved) shower arms at 16" length.
I would like to purchase this rain shower head, but i am in need of a 16" ceiling shower arm because of high ceilings in my bathroom. I see the 12" 1660.190.12, but do you have anything in the 16" range for this specific shower head or do you have any suggestions on what I can do in this situation
A. The American Standard 1660.683 is typically compatible with any shower arm that you can purchase as the threading is standard. However, we do not have any rainfall (or straight, non-curved) shower arms at 16" length.
The American Standard 1660.683 has a flow of 2 gpm.
what is the gpm on this head
A. The American Standard 1660.683 has a flow of 2 gpm.
The American Standard 1660.683 uses a standard shower arm wall supply. The trim to control the water pressure and temperature is separate and is what requires the rough in valve.
what kind of a valve do you use to turn on and off? My wife won't like it, but I really want to install this.
A. The American Standard 1660.683 uses a standard shower arm wall supply. The trim to control the water pressure and temperature is separate and is what requires the rough in valve.
American Standard Modern Collection
Other Products In The American Standard Modern Collection
American Standard 2460.002
Cambridge 60" Americast Soaking Bathtub with Left ...$537.55-$639.60(26)
American Standard 2764.014M202
Cadet 64-5/8" Acrylic Soaking Bathtub for Free Sta...$1,352.25-$1,352.25(16)
American Standard 2391.202
Princeton 60" Americast Soaking Bathtub with Right...$325.65-$425.10(19)
American Standard 2461.002
Cambridge 60" Americast Soaking Bathtub for Alcove...$537.55-$639.60(32)
American Standard 4175.300
Colony Pullout Kitchen Faucet$102.59-$150.24(35)
American Standard Faucet Lifetime Function and Finish Limited Warranty American-Standard warrants this product to be free from defects in materials or workmanship for as long as the original consumer purchaser owns their home. American-Standard will provide, free of charge, at it’s sole option, replacement part(s) or product (or if no longer available, a comparable product) to replace those which have proven defective in materials or workmanship. Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to American-Standard for all limited warranty claims. This limited warranty is non transferable. It does not apply in the event of product damage due to the use of other than genuine American-Standard replacement parts, installation error, abuse, misuse, or improper care and maintenance (whether performed by a plumber, contractor, service provider or member of the purchaser’s household). The limited warranty excludes damage due to aggressive air or water conditions, or harsh or abrasive cleaners and/or materials. This limited warranty excludes all industrial, commercial and business usage, whose purchasers are hereby extended a two year limited warranty (with the exception of solenoid valves and other electronic components which carry a one year limited warranty) applying to all other terms of this limited warranty except duration. This limited warranty does not cover labor charges incurred and/or damages sustained in installation, repair or replacement, nor incidental or consequential damages, all of which are expressly disclaimed. This limited warranty is applicable only to American-Standard faucets manufactured after June 1, 1996 and installed in the United States and/or Canada. This limited warranty gives the original consumer purchaser of an America-Standard faucet specific legal rights which may vary from state to state or from province to province. This limited warranty does not cover any liability for consequential or incidental damages, all of which are hereby expressly disclaimed, or the extension beyond the duration of this limited warranty of any implied limited warranties, including those of merchantability or fitness for an intended purpose. In some states or provinces the exclusion or limitation of incidental or consequential damages is not allowed, so those exclusions may not apply to you.